Product ID:CLEAR CUTTING OIL
MSDS Date:01/30/1989
FSC:9150
NIIN:00N001344
MSDS Number: BCHPQ

HERCULES CHEMICAL CO INC

29 WEST 38 STREET
NEW YORK, NY 10018-5595
US

Emergency Phone: 201-778-5000

Info Phone: 201-778-5000

Cage: 84794

HERCULES CHEMICAL CO INC

PASSAIC, NJ 07055-7398 US

Telephone: 973-778-5000

Cage: 84794

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)

CAS: 64742-52-5

RTECS: PY8035001

OSHA PEL 5MG/M3 OIL MIST(MFR)

ACGIH TLV: 5MG/M3 OIL MIST(MFR)

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)

CAS: 64742-53-6

RTECS: PY8036001

OSHA PEL 5MG/M3 OIL MIST(MFR)

ACGIH TLV: 5MG/M3 OIL MIST(MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:LOW ORAL/DERMAL TOXICITY. POSSIBLE
ASPIRATION HAZARD:INDUCED VOMITING MAY CAUSE ASPIRATION INTO LUNGS.
SKIN:MODERATE IRRITATION, DEFATTING. EYE:MILD TRANSIENT IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:VAP INHAL UNDER AMBIENT CNDTNS IS NORMALLY NOT PROB. IF
OVERCOME BY VAP FROM HOT PROD, IMMED REMOVE TO FRESH AIR, IF NOT
BRTHG. GET MED ATTN. INGEST:DO NOT INDUCE VOMIT. GET MED ATTN.
SKIN:FLUSH W/PLENTY OF SOAP & WATER. EYE:FLUSH W/PLENTY OF WATER
FOR AT LST 15 MINS OR UNTIL IRRIT SUBSIDES. IF IRRIT PERSISTS, GET
MED ATTN.

Flash Point Method:COC
Flash Point:320F,160C
Extinguishing Media:DRY CHEMICAL,FOAM,CARBON DIOXIDE
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE WATER TO KEEP FIRE EXPOSED CNTNRS COOL.
WATER MAY BE USED TO FLUSH SPILLS AWAY FROM EXPOS.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:HANDLE AS AN OIL SPILL. USE OIL ABSORBING
MATERIAL. SWEEP & SCOOP UP & REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL PRECAUTIONS MEEDED
NORMALLY. HOWEVER,AVOID BREATHING OF OIL MIST & EXCESSIVE SKIN
CONTACT.
Other Precautions:MINIMIZE BREATHING VAPOR, MIST, FUMES.

Respiratory Protection:NIOSH/MSHA APPROVED MASK FOR OIL MIST.
Ventilation:LOCAL EXHAUST-AS NEEDED TO COMPLY W/TLV.
Protective Gloves:RUBBER-OIL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:GLOVE RECOMMENDED IF PROLONGED SKIN CONTACT
CANT BE AVOIDED
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. REMOVE
CONTAMINATED CLOTHING, LAUNDER OR DRY CLEAN.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:V6
Boiling Pt:B.P. Text:WIDE RANGE
Vapor Pres:<0.1
Vapor Density:>8
Spec Gravity:0.906 (H*2O=1)
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT AMBER LIQUID; PETROLEUM ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS SUCH AS LIQ CHLORINE, SODIUM, CALCIUM HYPOCHLORITE,
PURE OXYGEN.
Stability Condition to Avoid:OPEN FLAMES, SPARKS, IGNITION SOURCES.
Hazardous Decomposition Products:CARBON MONOXIDE, HYDROGEN SULFIDE ON
INCOMPLETE COMBUSTION.

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGS . FOR LARGE QUANTITIES, ASSURE CONFORMITY W/APPLIC DISPOSAL
REGS. DISPOSE OF ABSORBED MATL AT AN APPROVED WASTE DISPOSAL SITE
OR FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.